Faster 24V LiFePO4 Charging with 0V Battery Wake-Up
A 10A lithium charger for 24V (25.6V) LiFePO4 batteries in RVs, campers, trucks, solar setups, boats, electric yachts and trolling motors; it charges a 50Ah battery in about 5 hours.
- 29.2V 10A Output
- Up to 94% Efficiency
- 0V Wake-Up
- IP67, Under 50 dB
Key Features
-
Revives Sleeping Batteries
0V wake-up resets packs whose BMS has cut off after long storage or over-discharge, bringing them back from low voltage.
-
Two Ways to Connect
M8 ring terminals give a secure fixed connection; alligator clips are quicker for occasional charging.
-
Four-Stage Charging
Pre-charge, constant current, constant voltage stage 1 and constant voltage stage 2, with voltage and current adjusted automatically.
-
Seven Protections
Overheating, reverse polarity, over-voltage, over-current, short circuit, no-load and maximum charging time; charging stops at 100% or after 15 hours.
-
Mount It Once
Four mounting holes in the base let you fix the charger in a vehicle or on a wall and simply plug it in for the next charge.
-
Sealed and Quiet
Aluminum alloy casing that is waterproof, dustproof and shockproof for long outdoor service.
Highlights
Ring Terminals or Clips
The same charger works with bolted M8 ring terminals or clamp-on alligator clips.
3-Color Status Light
Red fast flash 0~19%, red slow flash 20~79%, yellow flash 80~99%, green flash at about 100%, steady green when full; red and green flashing alternately signals a fault.
Built-In Cooling Fan
A fan under the handle lowers operating temperature while the protections watch the charge.
What Each Part Does
Handle, cooling fan and charging indicator on the body, a DC output cable with a quick connector, the AC input cable, and the two battery leads.
How to Use
- Attach the battery leadBolt the M8 ring terminals to the battery posts, or clamp on the alligator clips, matching polarity.
- Join the connectorCouple the battery lead to the charger’s output cable at the quick connector.
- Plug into AC powerConnect the charger to a 90-120V or 180-240V outlet.
- Watch the indicatorFollow charging progress on the 3-color status light.
- Disconnect at the connectorUnplug at the quick connector and leave the ring terminals on the battery for the next charge.
Good to Know
Care
- Store the charger between -40°F and 176°F.
English 
German 
Spanish 