Key Programming and OE-Level Diagnostics With the XP400 Pro
The IM508S Pro combines the IM508S tablet with the XP400 Pro key programmer for immobilizer and key work, and adds OE-level diagnostics, bi-directional control and guided service functions across 80+ American, European and Asian brands.
- Programmateur XP400 Pro
- Read PIN
- Guidage en mode intelligent
- Commande bidirectionnelle
- Multi-Language
Key Features
-
IMMO et programmation de clés
Key chip programming for Benz 3rd generation, BMW CAS 4/3/2 and VW/Audi MQB, plus ECU read/write, MC9S12, IC card, Mercedes infrared keys and remote frequency detection with the XP400 Pro.
-
Read PIN
Reads the PIN needed for immobilizer and key procedures.
-
Smart Mode
Guided functions give step-by-step instructions through the entire operation.
-
Fonctions d’entretien
EPB, DPF, SAS and BMS service, plus TPMS sensor replacement and sensor test.
-
Diagnostic de niveau OE
Diagnoses all modules on most makes and models, with bi-directional control.
Autres caractéristiques
| Connectivity | Mini USB 2.0, USB 2.0, Wi-Fi, Micro SD card (up to 64GB) |
|---|---|
| Capteurs | Ambient light sensor for automatic brightness |
| Audio output | Avertisseur sonore |
| Charge | 5 VDC power supply; 5 V/1.5 A charging input |
| Consommation électrique | 500 mA at 3.7 V (LCD on at default brightness, Wi-Fi on) |
| Température de fonctionnement | 0 à 50°C (32 à 122°F) |
| Température de stockage | -20 à 60°C (-4 à 140°F) |
| Humidité de fonctionnement | 5%–95% sans condensation |
| Net weight | 788 g (2.42 lb) |
Configuration et utilisation : Manuel d’utilisation IM508S (PDF) et Guide rapide IM508S (PDF).
Good to Know
Attention
- Under a North American IP address, the MaxiIM IM508 series requires an active NASTF SDRM subscription, which is not included and must be purchased separately.
English 
Deutsch 
Español 
Nederlands 
Français 