Read Engine, Transmission, ABS and SRS Codes and Run Common Service Resets
The MaxiDiag MD806 reads and clears codes and shows live data on four core systems, performs common service resets and runs the full set of OBD2 tests from a 4-inch handheld.
- 4 Systems
- 7 réinitialisations d’entretien
- Les 10 modes OBD2
- Impression des rapports via PC
- Rubber Boot Housing
Key Features
-
Diagnostic de quatre systèmes
Read and clear codes and view live sensor data on ABS, SRS (airbag), engine and transmission, to trace misfires, faulty injectors, transmission oil temperature or why the check engine, ABS or airbag light is on.
-
Service Resets
Oil reset, EPB reset, SAS reset, DPF regeneration including forced regeneration, battery registration, throttle relearn and air-fuel ratio reset; also resets service intervals and turns off the ECU brake warning light.
-
OBD2 Tests
Read and clear codes, live data, smog check (I/M readiness), freeze frame, O2 monitor test, on-board monitor test, component test, module present and vehicle information, with enhanced mode 6 support.
-
Diagnostic Reports
Print diagnostic reports through a PC connection for further review and analysis.
-
Prise en charge globale OBD II
U.S. domestic, Asian and European makes and models, with all OBD II protocols.
Autres caractéristiques
| Mémoire | 32MB, 166 MHz |
|---|---|
| Consommation électrique | 1.7 W |
| Température de fonctionnement | De -10°C à 60°C (de 14°F à 140°F) |
| Température de stockage | -20℃ à 70℃ (-4℉ à 158℉) |
| Humidité de fonctionnement | 5%–95% sans condensation |
| Housing | Plastic housing with protective rubber boot |
Contenu du coffret
- 1×Unité principale MaxiDiag MD806
- 1×Main cable
- 1×Carry case
- 1×Guide de référence rapide
- 1×Micro SD card
- 1×Câble USB
Good to Know
Attention
- The MD806 does not work on vehicles after 2015.
- Service resets do not work on all cars; check your vehicle and the functions you need before ordering.
English 
Deutsch 
Español 
Nederlands 
Français 