Activate, Read, Relearn and Program TPMS Sensors From One Handheld
The MaxiTPMS TS508WF activates all known OE sensors, reads sensor status, checks TPMS system health, programs Autel MX-Sensors and performs relearns, with software updates over Wi-Fi or USB.
- Activez / lisez / réapprenez
- Programmation de MX-Sensor
- Modes rapide et avancé
- Wi-Fi Updates
- Test du signal de télécommande de clé
Key Features
-
Écran d’état TPMS
Read sensor IDs stored in the ECU, check that sensor and ECU IDs match, read and erase DTCs, and view DTC descriptions.
-
Données des capteurs en un coup d’œil
Displays sensor ID, pressure in psi and, on supported sensors, battery life.
-
Réapprentissages guidés
Shows vehicle-specific relearn procedures and performs OBDII relearns.
-
Deux options de programmation de MX-Sensor
Copy by OBD writes the ID saved in the ECU; Auto Create makes new IDs when the original cannot be obtained.
-
Sélection du type de pneu et de la pression
When all TPMS faults are cleared and the tires are at placard pressure but the TPMS light stays on, select the tire type and set the correct pressure value; placard reset works on supported vehicles.
-
Mise à jour sans ordinateur
Update the software directly over Wi-Fi, or by USB.
Autres caractéristiques
| Battery type | Li-polymer |
|---|---|
| Température de fonctionnement | De 0°C à 50°C (de 32°F à 122°F) |
| Température de stockage | -20℃ à 70℃ (-4℉ à 158℉) |
Contenu du coffret
- 1×MaxiTPMS TS508WF
- 1×OBD II cable
- 1×Câble USB
- 1×AC adapter
- 1×Packing list
- 1×Carrying case
Good to Know
Attention
- Sensor programming works with Autel MX-Sensors only.
English 
Deutsch 
Español 
Nederlands 
Français 