Câble de test principal pour l’outil de diagnostic moto FXTUL M7
The main test cable connects the FXTUL M7 to a motorcycle's diagnostic socket or to a brand-specific connector. It is designed for the M7 only.
- Pour FXTUL M7
- Câble à trois extrémités
- Prise d’alimentation DC
- Pièce de rechange
Key Features
-
Trois points de connexion
A D-sub plug with thumb screws for the scanner end, a red OBD-style connector for the vehicle side, and a round DC power socket on a short lead.
-
Connexion sûre de l’outil de diagnostic
Thumb screws on the D-sub plug let the cable be fastened so it does not work loose during a test.
-
Entrée d’alimentation pour prises spéciales
Some special diagnostic sockets do not supply power; in that case the M7 manual calls for power from the battery clamp, which the DC socket is typically used for.
Contenu de la boîte
- Câble principal de test FXTUL pour M7
How to Use
- Inspectez le câbleCheck the cable and all three connectors for damage before use.
- Raccordez l’appareil de diagnosticPlug the D-sub end into the M7 and tighten the thumb screws.
- Raccordez la motoAttach the OBD-style end to the motorcycle's socket or to the connector that matches the brand and socket style.
- Ajoutez l’alimentation si nécessaireIf the socket does not power the M7, supply power through the battery clamp as described in the M7 manual.
Présentation complète du menu : Manuel utilisateur FXTUL M7 (PDF)
Good to Know
Attention
- Fits the FXTUL M7 only. Only the cable is included; the scanner, brand connectors and battery clamp are not part of this item.
- Do not use the cable if the insulation or any connector is damaged.
Entretien
- Do not twist or sharply bend the cable; keep it away from heat, oil, sharp edges and moving parts.
- Utilisez la sangle pour enrouler le câble avant rangement.
English 
Deutsch 
Español 
Nederlands 
Français 