Connect a Mercedes-Benz 38-Pin Port to a 16-Pin Scan Tool
This 42 cm adapter cable links the round 38-pin diagnostic port on Mercedes-Benz vehicles that use it to a 16-pin OBD2 scan tool. It changes only the physical connection; vehicle coverage and functions come from the scan tool you connect.
- 38 broches → 16 broches
- 42 cm Cable
- Copper Core
- Adaptateur passif
Key Features
-
Routage passif des broches
Routes the vehicle’s existing signals to the tool side with no protocol conversion and no added scan functions.
-
Gaine en nylon renforcée
The braided nylon outer layer adds wear resistance, flexibility, waterproofing, heat resistance and anti-aging protection for daily workshop handling, and is designed to reduce cracking.
-
Conducteurs entièrement en cuivre
An all-copper wire core supports stable data transmission between the vehicle port and the scan tool.
-
Construction plus épaisse et plus lourde
A 7.00 mm, 135 g cable compared with the 5.00 mm, 80 g ordinary OBD cables shown in the manufacturer’s comparison.
Contenu du coffret
- 1×Mercedes-Benz 38-pin to 16-pin adapter cable
How to Use
- Confirmez le port du véhiculeIdentify the connector, model year and pinout, and inspect the port for damage.
- Confirmez la combinaison d’outilsCheck that the scanner, software, protocol, target module and any required authorization match the vehicle.
- Connect safelyFollow the vehicle and tool procedure and align the connectors; never force a mismatched plug.
- Acheminer sans tensionKeep the cable away from pedals, sharp edges, heat, moving parts and pinched trim.
- Vérifier la communicationRun a read-only connection check first; if communication is unstable, compare against a direct connection.
Good to Know
Attention
- This is not a diagnostic scanner. A 16-pin scan tool that supports the Mercedes-Benz model, protocol and system is required and sold separately, along with any software or licenses.
- Do not attach unknown or high-current devices to vehicle diagnostic power; follow the vehicle and tool current limits.
- If the tool drops connection, overheats, resets or changes vehicle behavior, stop and return to a known direct connection.
Entretien
- Keep the connector pins clean, dry and free of debris before use.
English 
Deutsch 
Español 
Nederlands 
Français 