Read Codes on All Systems and Run Common Service Resets From One Handheld
The MaxiDiag MD806 Pro reads and clears codes and shows live data on all available systems, runs the full set of OBDII tests, and performs oil, battery, EPB, SAS, DPF, SRS, throttle and A/F service functions on a limited range of makes and years.
- Codes de tous les systèmes et données en temps réel
- 10 modes de test OBDII
- 7 fonctions d’entretien
- Auto VIN
- Impression des rapports par PC
Key Features
-
Fonctions d’entretien
Oil service reset, battery registration and reset, parking brake pad relearn after replacement, steering angle sensor relearn and diesel particulate filter regeneration, plus SRS, throttle and A/F adjustment.
-
Tests OBDII complets
Freeze frame data, I/M readiness, O2 monitor test, on-board monitor test, component test, vehicle information (CIN and CVN), modules present and DTC lookup.
-
Lecture et effacement des codes, réinitialisation du MIL
See why warning lights are on, decide whether to fix the fault yourself or go to a mechanic, then clear occasional codes and reset the lights.
-
Auto VIN
Retrieves the Vehicle Identification Number automatically for efficient diagnosis.
-
Data Review
Play back recorded data, and print diagnostic reports through a Windows-based PC.
Autres caractéristiques
| Mémoire | 32MB, 166 MHz |
|---|---|
| Consommation électrique | 1.7 W |
| Température de fonctionnement | De -10°C à 60°C (de 14°F à 140°F) |
| Température de stockage | -20℃ à 70℃ (-4℉ à 158℉) |
| Humidité de fonctionnement | 5%–95% sans condensation |
| Housing | Strong plastic housing with protective rubber boot |
Contenu du coffret
- 1×Unité principale MD806 Pro
- 1×OBD II cable
- 1×Câble USB
- 1×Micro SD card
- 1×User manual
- 1×Quick guide
- 1×Carry case
English 
Deutsch 
Español 
Nederlands 
Français 